|
二维码(扫一下试试看!) |
响应面分析法优化桑枝SCMP制浆工艺 |
Optimization of Mulberry Stalk SCMP Process Using Response Surface Methodology |
|
DOI:10.11980/j.issn.0254-508X.2014.07.006 |
关键词: 响应面 桑枝 SCMP |
Key Words:response surface mulberry stalk SCMP |
基金项目:大学生创新创业训练项目(1301062);广西科学研究与技术开发项目(桂科攻1348013-5)。 |
|
摘要点击次数: 5426 |
全文下载次数: 1643 |
摘要:采用桑枝为原料制备磺化化机浆(SCMP浆),考察磺化条件对桑枝SCMP浆性能的影响。通过单因素实验和响应面分析法探讨制备SCMP浆的最佳工艺条件。结果表明,最佳工艺为:NaOH用量3%,Na2SO3用量18%,最高温度115℃。在此条件下获得的SCMP浆白度为49.4%,耐破指数为4.51 kPa·m2/g,抗张指数为31.8 N·m/g, 撕裂指数为5.35 mN·m2/g。 |
Abstract:The effect of sulfonation conditions on papermaking performance of SCMP using mulberry stalk as a raw material was studied. The optimal bleaching conditions of was obtained by using single factor experiment and response surface methodology. The dosages of NaOH and Na2SO3 were 3% and 18% respectively and maximum temperature was 115℃. The brightness, burst index, tensile index and tear index of the bleached pulp were 49.4%, 4.51 kPa·m2/g, 31.8 N·m/g and 5.35 mN·m2/g. |
查看全文 查看/发表评论 下载PDF阅读器 |