|
二维码(扫一下试试看!) |
聚丙烯蜡对纸张表面疏水性的影响 |
Improvement of Paper Surface Hydrophobicity with Polypropylene Wax |
|
DOI:10.11980/j.issn.0254-508X.2014.10.004 |
关键词: MWPP 复合胶膜 低表面能 疏水 |
Key Words:modified WPP blend film low-surface-energy hydrophobicity |
基金项目: |
|
摘要点击次数: 5176 |
全文下载次数: 1898 |
摘要:用改性聚丙烯蜡(MWPP)乳液与羧基丁苯胶乳共混,将复合乳液应用于纸张表面施胶,研究不同改性的MWPP及其含量对纸张表面疏水性能的影响。利用偏光显微镜、原子力显微镜(AFM)和接触角测量仪测试丁苯-MWPP复合胶膜的表面性能。结果表明,MWPP在复合胶膜表面形成“海岛型”突起结构;当MWPP含量由0增加到5%时,复合乳液涂布的白纸板的表面水接触角从65.35°提高到114.83°;胶膜厚度对复合胶膜表面水接触角和表面能影响不大。 |
Abstract:The complex emulsions which were prepared by blending carboxyl styrene-butadiene latex with modified polypropylene wax (MWPP) emulsions were applied to paper coating, and the effects of different kinds and contents of MWPP on paper surface hydrophobicity were researched. The surface properties of styrene-butadiene-MWPP blended films were analyzed by polarizing microscopy, AFM(Atomic Force Microscopy) and contact angle measurements. The results showed that “island-type” structures of MWPP were formed on the blended film. Water contact angle of blended film surface increased from 65.35° to 114.83° with the increasing of MWPP content from 0 to 5%. Meanwhile, coating thickness had little impact on water contact angle and surface energy of the blended film. |
查看全文 查看/发表评论 下载PDF阅读器 |