|
二维码(扫一下试试看!) |
合成硅酸钙在轻型纸中的应用研究 |
Characteristics of Synthetic Calcium Silicate Filler and Its Application in Low Density Printing Paper |
|
DOI:10.11980/j.issn.0254-508X.2015.01.003 |
关键词: 合成硅酸钙 轻型纸 填料性能 纸张性能 |
Key Words:synthetic calcium silicate low density printing paper filler characteristics paper properties |
基金项目: |
作者 | 单位 | 彭建军1,2 | 1.中国制浆造纸研究院,北京,100102;2.制浆造纸国家工程实验室,北京,100102 | 张 权1,2 | 1.中国制浆造纸研究院,北京,100102;2.制浆造纸国家工程实验室,北京,100102 | 陈铃华1,2 | 1.中国制浆造纸研究院,北京,100102;2.制浆造纸国家工程实验室,北京,100102 | 沈臻煌1,2 | 1.中国制浆造纸研究院,北京,100102;2.制浆造纸国家工程实验室,北京,100102 | 王成海3 | 3.大唐国际高铝煤炭资源开发利用研发中心,内蒙古呼和浩特,010050 | 宋宝祥3 | 3.大唐国际高铝煤炭资源开发利用研发中心,内蒙古呼和浩特,010050 | 魏晓芬3 | 3.大唐国际高铝煤炭资源开发利用研发中心,内蒙古呼和浩特,010050 |
|
摘要点击次数: 6822 |
全文下载次数: 2060 |
摘要:检测分析了合成硅酸钙的性能,并研究了其作为填料在轻型纸中的应用效果。结果表明,合成硅酸钙呈蜂窝状疏松多孔结构,具有比表面积大、密度小、磨耗值低等特性,且含有一定数量的化学结构水,具有较强羟基持有能力;合成硅酸钙作为轻型纸的填料,与轻质碳酸钙(PCC)相比,其单程留着率高,浆料滤水性好;可赋予纸张较高的松厚度,同时对纸张抗张强度和施胶度的负面影响较小。 |
Abstract:The characteristics of synthetic calcium silicate filler and its application in low density printing paper were studied. The results showed that synthetic calcium silicate had honeycomb porous structure, with large specific surface area, low density, low abrasion value, and other characteristics. It contained a certain amount of chemical structural water with strong hydroxyl holding capacity. Compared with precipitated calcium carbonate (PCC), synthetic calcium silicate retention and drainability of the furnish were better than PCC where it was used as the filler in low density printing paper production, and it could endow the paper with higher bulk, and smaller negative effluence on tensile strength and sizing degree, it could also increase the amount of filler addition effectively. |
查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|