本文二维码信息
二维码(扫一下试试看!)
纳米CaCO3用于颜料化表面施胶的研究
Application of Nano-CaCO3 in Surface Sizing
  
DOI:10.11980/j.issn.0254-508X.2015.02.001
关键词:  纳米CaCO3,颜料化表面施胶,纸张性能
Key Words:nano-CaCO3  pigment-added surface sizing  properties of paper
基金项目:
作者单位
谢清萍1,2 1.中国制浆造纸研究院,北京,100102 2.制浆造纸国家工程实验室,北京,100102 
彭建军1,2,* 1.中国制浆造纸研究院,北京,100102 2.制浆造纸国家工程实验室,北京,100102 
张权1,2 1.中国制浆造纸研究院,北京,1001022.制浆造纸国家工程实验室,北京,100102 
沈臻煌1,2 1.中国制浆造纸研究院,北京,100102 2.制浆造纸国家工程实验室,北京,100102 
摘要点击次数: 7561
全文下载次数: 1996
摘要:通过与淀粉、淀粉+GCC两种施胶液进行对比,探讨了纳米CaCO3在纸张表面施胶中的应用效果。结果表明,分散好的纳米CaCO3通过表面施胶在纸张表面形成的膜连续性好,纸张表面很平整。与未经表面施胶的原纸相比,使用含纳米CaCO3的施胶液表面施胶后纸张的施胶度略有提高,平滑度上升的幅度达到56.1%,抗张强度提高了12.0%,表面强度和油墨吸收性都得到了显著的改善,白度和不透明度有所下降。
Abstract:The Results of the application of nano-CaCO3/starch, GCC/starch and starch only in surface sizing of paper were compared. Under the sizing amount of 1.5 g/m2, the nano-CaCO3 /starch film formed on paper surface was very smooth. The sizing degree was improved slightly, the smoothness increased up to 56.1%, tensile strength increased by 12.0%, surface strength and ink absorbency were improved significantly, while brightness and opacity were declined slightly.
查看全文  查看/发表评论  下载PDF阅读器