|
二维码(扫一下试试看!) |
混凝-絮凝工艺处理水性油墨废水 |
Treatment of Water-based Ink Wastewater by Coagulation-flocculation Process |
|
DOI:10.11980/j.issn.0254-508X.2016.03.003 |
关键词: 混凝 PAC CPAM pH值 水性油墨废水 絮凝 |
Key Words:PAC CPAM pH value water-based ink wastewater flocculation |
基金项目:本课题得到国家科技部国家“十二五”科技支撑项目(2011BAC-11B04)和天津市制浆造纸重点实验室(天津科技大学)开放基金资助项目(201303)的资助。 |
|
摘要点击次数: 7327 |
全文下载次数: 2510 |
摘要:采用混凝-絮凝工艺处理水性油墨废水,探讨了油墨废水初始pH值、PAC用量和CPAM用量对CODCr去除率、色度去除率和浊度去除率的影响。采用中心组合设计(CCD)和响应曲面法(RSM)设计多因素实验并优化混凝-絮凝过程中的3个影响因素。单因素实验结果表明,混凝-絮凝工艺处理废水主要是通过电荷中和以及架桥作用完成的,降低废水初始pH值可以提高去除率。多因素实验结果表明,废水初始pH值为6.56,PAC最佳用量为126.5 mg/L,CPAM最佳用量为4.6 mg/L,CODCr去除率达到96.5%;废水初始pH值为6.78,PAC最佳用量为107.7 mg/L,CPAM最佳用量为3.0 mg/L,色度去除率接近100%;废水初始pH值为6.5,PAC最佳用量为107.8 mg/L,CPAM最佳用量为5.8 mg/L,浊度去除率达到99.97%。整合以上3个响应面的最佳条件,油墨废水的初始pH值为6.51,PAC最佳用量为128.7 mg/L,CPAM最佳用量为4.9 mg/L,处理效果最好。 |
Abstract:Treatment of water-based ink wastewater by coagulation-flocculation process with PAC as coagulant and CPAM as flocculant was studied. Single-factor experiment and multi-factor experiment were applied to study the effect of pH, PAC dosage and CPAM dosage on removal efficiency of CODCr, color and turbidity. A 23 full central composite design (CCD) and response surface methodology (RSM) were employed to design the multi-factor experiment and optimize the three factors for the coagulation-flocculation process. Single factor experiment result showed that the decrease of pH could improve the removal efficiency as the function of coagulation-flocculation process was mainly based on charge neutralization and bridging. Multi-factor experiment result showed that the RSM approach was appropriate to optimiz the coagulation-flocculation process and the optimal conditions for the best treatment result of water-based ink were as the follows: PAC dosage 128.7 mg/L, CPAM dosage 4.9 mg/L, and initial pH value 6.51. |
查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|