本文二维码信息
二维码(扫一下试试看!)
基于LS-DYNA的真空输纸技术数值模拟
The Numerical Simulation of Suction-tape Feeding Technology Based on LS-DYNA
  
DOI:10.11980/j.issn.0254-508X.2016.10.010
关键词:  真空输纸  LS-DYNA  纸张挺度  力学行为  数值模拟
Key Words:suction-tape feeding  LS-DYNA  paper stiffness  mechanical behavior  numerical simulation
基金项目:
作者单位
郑俊强1 1.贵州大学机械工程学院,贵州贵阳,550025 
何 林2 2.贵州师范学院,贵州贵阳,550018 
唐正强1 1.贵州大学机械工程学院,贵州贵阳,550025 
摘要点击次数: 6998
全文下载次数: 2071
摘要:为提高真空输纸性能,对真空输纸技术中纸张的力学行为进行了模拟分析。由于柔性薄片纸张受力屈曲具有几何非线性的特点,提出了真空输纸技术中纸张力学行为的显式动力学数值分析方法,基于LS-DYNA的壳单元建立了纸张的有限元模型。探讨了不同挺度的纸张在输纸带孔处的应力分布、变形规律及承受侧规拉力的性能。结果表明,随着纸张挺度的增大,真空吸附过程中的纸面应力和隆起变形均减小,而侧规拉力承载能力增强。
Abstract:To improve the performance of suction-tape feeding, the simulation analyses of paper’s mechanical behavior in suction-tape feeding technology was conducted. Considering the geometric nonlinearity of flexible thin paper’s buckling, this article proposed the explicit dynamic numerical analysis method of the paper’s mechanical behavior in suction-tape feeding technology, established the paper’s finite element model based on the shell element of LS-DYNA. The article discussed the stress distribution, deformation law and the performance to resist the side lay’s drawing force of the papers with different stiffness. Results showed that with the increase of paper stiffness, both the paper stress and the ridgy deformation was decreased during vacuum suction, while the ability of resisting the side lay’s drawing force was enhanced.
查看全文  查看/发表评论  下载PDF阅读器