本文二维码信息
二维码(扫一下试试看!)
形状因子表征MCC颗粒形貌与粉体流动性的关系
Characterization of the Relationship Between MCC Particle Morphology and Powder Flowability by Shape Factor
投稿时间:2019-09-04  
DOI:10.11980/j.issn.0254-508X.2019.12.001
关键词:  微晶纤维素  微观形貌  流动性  形状因子
Key Words:microcrystalline cellulose  micromorphology  flowability  shape factor
基金项目:国家重点研发计划项目 2017YFB0307901 ; 陕西省重点研发计划项目 2017ZDXM-SF-090 国家重点研发计划项目(2017YFB0307901);陕西省重点研发计划项目(2017ZDXM-SF-090)。
作者单位
李金宝 陕西科技大学轻工科学与工程学院轻化工程国家级实验教学示范中心陕西省造纸技术及特种纸品开发重点实验室陕西西安710021 
马飞燕 陕西科技大学轻工科学与工程学院轻化工程国家级实验教学示范中心陕西省造纸技术及特种纸品开发重点实验室陕西西安710021 
修慧娟 陕西科技大学轻工科学与工程学院轻化工程国家级实验教学示范中心陕西省造纸技术及特种纸品开发重点实验室陕西西安710021 
赵欣 陕西科技大学轻工科学与工程学院轻化工程国家级实验教学示范中心陕西省造纸技术及特种纸品开发重点实验室陕西西安710021 
冯盼 陕西科技大学轻工科学与工程学院轻化工程国家级实验教学示范中心陕西省造纸技术及特种纸品开发重点实验室陕西西安710021 
杨雪 陕西科技大学轻工科学与工程学院轻化工程国家级实验教学示范中心陕西省造纸技术及特种纸品开发重点实验室陕西西安710021 
摘要点击次数: 5527
全文下载次数: 3256
摘要:由于微晶纤维素(Microcrystalline cellulose,MCC)颗粒形貌不规整,难以定量表征,因此很难在颗粒形貌与粉体流动性之间建立定量关系。本研究尝试用形状因子(圆形度、伸长率、紧实度、固体性)对6种微晶纤维素(MCC)颗粒的微观形貌进行定量表征,探讨了差异最显著的形状因子圆形度与其他形状因子之间的相关性,并建立圆形度与MCC粉体流动性之间的数值关系。结果表明,流动性差异大的MCC颗粒形状因子中圆形度差异最显著;无论MCC粉体流动性如何,圆形度与其他形状因子均存在一定程度的正负相关性;圆形度分布越集中,流动性越好;圆形度与表征MCC粉体流动性的休止角之间符合一次线性关系。
Abstract:The relationship between microcrystalline cellulose (MCC) morphology and MCC powder flowability is difficult to quantitatively characterize due to the MCC particles are irregular in morphology. In this study, the shape factors (circularity, elongation, compactness, solidity) were used to quantitatively characterize the micro morphology of six types of MCC powder particles. After comparing the differences in micromorphology of different MCCs, the correlation between the shape factor with most significant difference and other shape factors was discussed, and the numerical relationship between it and MCC flowability was established. The results showed that the difference in circularity among the four shape factors of MCC particles with greatest difference in flowability was the most significant. Regardless of the flowability, there was a certain degree of positive or negative correlation between circularity and other shape factors. The concentrated distribution of circularity led to the excellent flowability. There was a linear relationship between the circularity and the repose angle of the MCC, the repose angle was used to characterize flowability.
查看全文  查看/发表评论  下载PDF阅读器