本文二维码信息
二维码(扫一下试试看!)
石灰制备轻质碳酸钙在双胶纸中的应用研究与工程实践
Application Research and Engineering Practice in Offset Paper of Light Calcium Carbonate Prepared from Lime
投稿时间:2023-03-16  
DOI:10.11980/j.issn.0254-508X.2023.10.020
关键词:  石灰  填料  轻质碳酸钙  灰分  平滑度
Key Words:lime  filler  light calcium carbonate  ash  smoothness
基金项目:
作者单位邮编
张鹏 驻马店市白云纸业有限公司河南驻马店463100 463100
李景哲* 驻马店市白云纸业有限公司河南驻马店463100 463100
摘要点击次数: 1271
全文下载次数: 988
摘要:本研究利用碱回收锅炉剩余烟气和石灰自制轻质碳酸钙(PCC),并应用于双胶纸生产。与外购PCC相比,自制PCC成纸的灰分含量提高4个百分点左右,不透明度、白度分别提升2个百分点和3个百分点。项目投产后,控制填料总成本不变,双胶纸平均定量降低了0.3 g/m2,不透明度提升了2个百分点,平滑度提升了3 s,厚度和印刷表面强度也略有提升。
Abstract:Residual fume and lime from an alkali recovery boiler were used to produce its self-prepared light calcium carbonate (PCC) for offset paper production. Compared with purchased PCC, the ash dosage of paper with self-prepared PCC was improved by 4 percentage points, opacity and whiteness were improved by 2 percentage points and 3 percentage points, respectively. After project commissioning, when the total cost of filler was kept constant, the average basis weight of offset paper was reduced by 0.3 g/m2, opacity was improved by 2 percentage points, smoothness was improved by 3 s, and thickness and print surface strength were also slightly improved.
查看全文  查看/发表评论  下载PDF阅读器