本文二维码信息
二维码(扫一下试试看!)
不同助留体系对装饰原纸二氧化钛复合填料留着效果的影响
Retention Results of Retention Systems on Titanium Dioxide Composite Filler in Preparing Decorative Base Paper
投稿时间:2023-06-13  
DOI:10.11980/j.issn.0254-508X.2024.01.016
关键词:  填料留着率  单元助留体系  双元助留体系  三元助留体系
Key Words:filler retention rate  unary retention system  binary retention system  ternary retention system
基金项目:浙江省自然科学基金(LQ23C160001)。
作者单位邮编
张妍* 天津科技大学天津市制浆造纸重点实验室天津300457
浙江科技大学环境与资源学院浙江杭州310023
杭州华旺新材料科技股份有限公司浙江杭州311305 
311305
王慧乐 浙江科技大学环境与资源学院浙江杭州310023 310023
乔文朴 浙江科技大学环境与资源学院浙江杭州310023 310023
王一凡 浙江科技大学环境与资源学院浙江杭州310023 310023
刘忠 天津科技大学天津市制浆造纸重点实验室天津300457 300457
吴海标 杭州华旺新材料科技股份有限公司浙江杭州311305 311305
摘要点击次数: 1431
全文下载次数: 810
摘要:本研究分别分析了单元助留体系阳离子聚酰胺环氧氯丙烷树脂(PAE),双元助留体系PAE/阴离子聚丙烯酰胺(APAM)、PAE/膨润土(MMT)、PAE/阳离子聚丙烯酰胺(CPAM),三元助留体系PAE/CPAM/APAM、PAE/CPAM/MMT对装饰原纸TiO2/滑石粉复合填料留着效果的影响。确定了各个体系的最佳添加量,并筛选出助留效果最好的助留体系。结果表明,当PAE添加量2.0%、CPAM添加量0.08%、MMT添加量0.6%时,组成的PAE/CPAM/MMT三元助留体系留着效果最佳,此时,浆料和填料留着率分别为89.5%和65.0%,纸张的不透明度、白度及匀度分别为98.5%、86.6%和91。
Abstract:In this paper, the retention results of retention systems such as cationic polyamide epichlorohydrin resin (PAE), PAE/anionic polyacrylamide (APAM), PAE/bentonite (MMT), PAE/cationic polyacrylamide (CPAM), PAE/CPAM/APAM, and PAE/CPAM/MMT on retention rate of titanium dioxide/talc composite filler in preparing decorative base paper were studied, and the optimal dosage of each system was determined. The results showed that when the dosage of PAE, CPAM, and MMT were 2.0%, 0.08%, and 0.6% respectively, ternary retention system of PAE/CPAM/MMT had the best retention results, the retention rates of pulp and filler were 89.5% and 65.0%, respectively, and the opacity, whiteness, and formation of the paper were 98.5%, 86.6%, and 91, respectively.
查看全文  查看/发表评论  下载PDF阅读器