本文二维码信息
二维码(扫一下试试看!)
P-RC APMP制浆非过程元素及蒸发器垢层研究
Study on Non-process Elements and Evaporator Scale in P-RC APMP Pulping Process
收稿日期:  
DOI:10.11980/j.issn.0254-508X.2014.03.001
关键词:  P-RC APMP系统  非过程元素  积累  蒸发  垢层
Key Words:P-RC APMP system  non-process elements  accumulation  evaporation  scale
基金项目:本课题为“十二五”科技支撑项目课题“15万吨/年碱性过氧化氢化学机械制浆全过程废液零排放技术与示范”(2011BAC11B02)资助项目。
作者单位
徐 明1,2 1.中国制浆造纸研究院北京1001022.制浆造纸国家工程实验室北京100102 
曹瀛戈1,2 1.中国制浆造纸研究院北京1001022.制浆造纸国家工程实验室北京100102 
冯文英1,2 1.中国制浆造纸研究院北京1001022.制浆造纸国家工程实验室北京100102 
苏振华1,2 1.中国制浆造纸研究院北京1001022.制浆造纸国家工程实验室北京100102 
张 羽1,2 1.中国制浆造纸研究院北京1001022.制浆造纸国家工程实验室北京100102 
摘要点击次数: 4438
全文下载次数: 1310
摘要:对P-RC APMP制浆系统非过程元素的积累进行了研究和核算,并分析了制浆废液蒸发器垢层的形成及成分。结果表明,系统中非过程元素按积累量由大到小的顺序排列为Si、Ca、K、Cl、Mg、S、P、Fe、Mn、Al;蒸发器垢层主要以Ca、Si、P、Mg元素为主,其中钙镁垢与硅垢各占近30%;垢层的防控需要从对系统中非过程元素的监控做起。
Abstract:The study and calculation of non-process elements accumulation in P-RC APMP process were carried out, and the formation and component of scale in evaporator which is used for concentrating the pulping waste liquor were analyzed. The results showed that the order of accumulation amount of non-process elements from high to low was Si, Ca, K, Cl, Mg, S, P, Fe, Mn, Al, in which, Si and Ca/Mg salts accounted for nearly 30% separately. The amount of non-process elements should be controlled in order to slow down the formation of the evaporator scale.
查看全文  HTML  查看/发表评论  下载PDF阅读器